High-Voltage Cable Processing
Three-Station Shield-Cutting Series
Three-Station Wire Stripping & Shield Cutting Integrated Machine (3–95 mm²)


PRODUCT OVERVIEW
Three-Station Wire Stripping & Shield Cutting Integrated Machine (3–95 mm²)
A three-in-one machine for new-energy cable preparation: fixed-length ring stripping of the outer insulation, fixed-length cutting and flipping of the shielding braid, and stripping of the inner insulation. Each function can be switched off and freely combined — strip outer + cut braid + flip + strip inner; cut braid + flip + strip inner when the outer insulation arrives pre-stripped; or strip outer + strip inner when the braid length matches the stripping length. A compact mechanism and an intelligent control system cover a wide cable range with different process requirements.
Technical information
- Operation: 10.4-inch industrial PC touchscreen
- Start modes: sensing and foot pedal
- Functions: outer stripping + braid cutting + braid flipping + inner stripping
- Cable range: 3–95 mm²
- Outer strip length: 0–300 mm
- Braid cutting length: max 280 mm
- Minimum retained shield length: 4 mm
- Braid flip length: 5–25 mm
- Power: AC 220 V, 50/60 Hz, single phase
- Power rating: 2.5 kW
- Dimensions: 1850 × 1025 × 1560 mm
- Weight: 750 kg
- Recipe storage: 500 programs
- Communication: MES hardware interface reserved
Process functions can be combined per product requirement, including partial configurations when the incoming cable is already partly prepared.
Typical application is new-energy high-voltage harness preparation; suitability is confirmed on your cable, braid and terminal samples.
Request a QuoteNEXT STEP
Discuss Your Application With Our Team
Send the details below and our engineers will review a suitable machine configuration, tooling and delivery plan.
- Wire type and cross-section range
- Terminal part number or drawing
- Finished length and target output
- Seal, heat-shrink or housing requirement
- Destination country for electrical configuration